Port yards are among the most technically challenging environments for GPS tracking in logistics. Dense metal container stacks block satellite signals. Thousands of containers occupy the same geographic area with 10-metre position resolution requirements. Vehicles, handling equipment, and containers all need tracking simultaneously, using different devices and different network technologies. GoAndTrack's multi-network BYOD architecture — Sensolus LoRaWAN on containers, GPS on vehicles, BLE at gate scan points — creates the unified port intelligence platform that individual network solutions cannot provide.
The Port Tracking Problem: Why Single-Technology Solutions Fail
A standard GPS tracker on a container at Felixstowe gives approximately 15–40 metre position accuracy in open areas, degrading to 30–80 metres when the container is stacked three high with adjacent metal structures blocking much of the sky. That accuracy level identifies which general area of the yard a container is in — not which stack position. A container management system that can't locate a specific box within a 1,000-container yard is nearly useless for operational planning.
BLE provides 1–5 metre accuracy indoors and in dense environments — but requires gateway infrastructure every 30–50 metres. Deploying BLE gateways across a 200-hectare port yard is expensive. LoRaWAN provides better penetration through metal-dense environments than standard GPS, with sufficient range to cover a large yard from a small number of gateways — but at lower positional granularity.
The practical answer is a multi-layer approach: LoRaWAN for container-level tracking across the full yard, BLE at defined scan points (gates, crane positions, inspection areas), GPS on vehicles moving through the yard, and human-recorded position updates when containers are physically moved by handlers. GoAndTrack normalises all four data sources into one operational picture.
The Multi-Network Port Tracking Architecture
Sensolus sensors on containers — yard-wide coverage
LoRaWAN gateways covering the full yard area provide zone-level container location (within 20–50m). Sensolus sensors report container presence, ambient temperature (for reefer units), vibration (tipping detection), and tamper events. 5+ year battery life means no battery management overhead across the container fleet.
Teltonika FMB920 on straddle carriers, reach stackers, yard tractors
Vehicle GPS provides precise location of handling equipment throughout the yard. When a straddle carrier picks up a container, the carrier's GPS position at the pick-up moment is cross-referenced with the container's Sensolus zone location to confirm the correct container was moved. Journey time between yard zones enables operational efficiency analysis.
Blecon BLE at gate lanes, crane positions, inspection bays
High-precision BLE scan events at defined positions — container gate entry/exit, crane lift positions, customs inspection bays. BLE precision (1–5m) provides the accurate position data that GPS cannot deliver in these specific, instrumented locations. Containers that pass through BLE scan points get precise position confirmation at those moments.
Dwell Time: The Hidden Cost at Port
Container dwell time — the time a container spends in a port yard between arrival and departure — is a key operational metric with direct financial implications. Port authorities often impose demurrage charges after a defined free period (typically 3–7 days for import containers). For the shipping line or freight forwarder, excess dwell time means charges that erode the margin on the shipment. For the port, excess dwell reduces throughput capacity.
Typical Demurrage Cost Structure — UK Major Port
Interoperability with Port Community Systems
Large ports operate Port Community Systems (PCS) — shared data platforms like PORTNET (Rotterdam), NEXION (Felixstowe), or similar — that coordinate data between shipping lines, port authorities, customs, and logistics partners. GoAndTrack does not replace these systems; it enhances them by providing the physical tracking layer that PCS systems typically lack.
GoAndTrack's API exports container location data, dwell time records, reefer status events, and vehicle movement histories in structured formats that can be ingested by PCS systems on a scheduled or event-triggered basis. The intelligence layer GoAndTrack adds — AI queries, Mission Control dwell alerts, cross-provider correlation — sits above the data exchange rather than competing with it.
Key Takeaways
- Port yards require multi-network tracking because no single technology handles containers, vehicles, and gate scan points adequately — LoRaWAN (containers, yard-wide), GPS (vehicles), and BLE (defined scan points) each contribute the data quality their environment supports
- Sensolus LoRaWAN sensors on containers provide zone-level location, temperature, vibration, and tamper monitoring at 5+ year battery life — the right balance of cost, data richness, and operational overhead for high-volume port container tracking
- Dwell time monitoring with configurable demurrage alerts eliminates the surprise charges that arise when containers sit past the free period unnoticed — a direct financial return measurable in the first month of deployment
- Reefer container monitoring in port yards — ambient temperature and plug connection time tracking — prevents cargo integrity failures during the port dwell phase that cold chain compliance in transit often overlooks
- GoAndTrack's API integration with Port Community Systems positions it as an intelligence layer above existing port data infrastructure rather than a competing system — adding AI queries and Mission Control alerts to the data that PCS systems already exchange
Container and yard movements become far more useful when they are read as shipment progress rather than isolated pings — see how GoAndTrack handles shipment visibility across mixed hardware.
Unified Port Visibility Across Every Network Layer
Sensolus on containers, Teltonika on vehicles, Blecon at gates — GoAndTrack normalises all three into one AI platform. Container tracking, dwell alerts, reefer monitoring, and vehicle intelligence from one interface.
Start Free at goandtrack.com →